.880 to top 22.35 of inner cable conductor .84 21.3 .270 6.86 catalog p/n: 120-900-1161r .121 .219 5.56 6.35 .250 .375 9.53 3.07 1.07 .042 (1.72 ) 43.7 when assembled of crimp attachment rev a qc-n straight plug drawing by drawn date approved date angles: 2 scale: 2:1 .xxxx .xxxx drawing drawn date psm 11/14/05 rev a description customer .xxx .005 [0.13] er5435 appd per date by 11/28/07 cwb 1 1 approved date dc 11/28/07 approved date m.ayub 11/28/07 approved date jc 11/28/07 SD120-900-1161R a rev cwb released decimal: .xx .01 [0.3] tolerances: dimensions are in inches [mm] unless otherwise specified: per asme y14.5m-1994 ronics t lec wallingford, connecticut 06492 62 barnes industrial road north date appd description rev date approved date approved w inches t er e winchester electronics corporation customer sht cable trim dimensions .110 2.79 .625 15.88 notes: unless otherwise specified 1. for general series specifications, see sd12-0000. 2. material specifications: center contact, sleeve and bu shing: brass per astm b16. body, outer contact, and ferrule: copper alloy insulator: teflon per astm d1710 3. finish specifications: center contact: .000050 min gold per astm b488 over .000100 min copper per astm b734 (rohs) all other metal parts: .000080 min tri-metal over .000100 min copper per astm b734 (rohs) ferrule: .000010 min tri-metal over .000100 min copper per astm b734 (rohs) 4. ferrule and contact shipped loose. 5. designed for use with rg55/u, 142, 223, 400 and equivalent cables. 6. crimp ferrule using .213 hex die. 7. mates with standard type n interface per mil-std-348a, fig 304.2 (.187.015 thread length). 8. electrical specifications: frequency range: dc-11ghz vswr: 1.15 max
|